Leather Care, Leather Cleaning and Leather Dye

  for Furniture, Marine, Tack, Motor Homes, Antiques

With Leatherique Products

"The Original and Simply the Best Since 1968"

Tip:

WIPE DYE explained:

You need:

1. Bowl for your dye to be poured into and MIXED so you get ALL the pigment and dulling agent out of the bottle
2. A roll of Bounty Towels, no we do not own stock in them but they WORK
3. A 2nd bowl with just water.
4. Rubber gloves or you will match your car

Your steps: Put on the gloves

•  Dip the Bounty into the water and wring out till almost DRY
• Make a POWDER PUFF out of the Bounty, NO EDGES
• Dip the powder puff into the dye getting VERY LITTLE, DO NOT SOAK THE PUFF.
• Now using a circular motion go over the project area almost as fast as you can move.
• Allow to dry (15 min or less) Hair dryer on low helps at this stage.
• Apply 2nd coat
• Build up your finish a little at a time. You will get the SAME results as spraying WITH out the expense or mess.

A Wipe Dyed interior.

Send mail to lrpweb@bellsouth.net with questions or comments about this web site.
Copyright © 2003 LEATHERIQUE DISTRIBUTIONS
Last modified: 07/10/08